Stainless Steel Washers
Here you will find stainless steel washers in V2A grade, fully powder-coated in the same RAL colours as our screws and nuts. The range covers washers to DIN 125 and DIN 9021, plus cover plates to NF E27-619, all available from M3 to M12 in six colours.
Because the entire washer is coated, you get a uniform finish once everything is assembled: washer, screw head and nut all match. The powder coating gives an extra layer of protection on top of the stainless steel, UV-resistant, colourfast, and it will not flake off.
Which stainless steel washers are available?
We stock three types, each suited to a different purpose:
- Washers to DIN 125: the standard washer. It spreads the load from the screw head across the surface and protects the material as you tighten.
- Washers to DIN 9021: the large-diameter version with a significantly wider outer diameter. The right choice when the substrate is softer or you need to distribute the load over a greater area.
- Cover plates to NF E27-619 in stainless steel A1: the decorative washer that covers the transition between the screw head and the surface.
Flat washer, plain washer and washer all refer to the same part, whichever term you search by, you are in the right place.
Sizes: M3 to M12
All three types are available for M3, M4, M5, M6, M8, M10 and M12. The washer size follows the thread of your screw: an M6 washer fits over an M6 screw. With the DIN 9021, the outer diameter is noticeably larger than on the DIN 125 for the same hole size, that is the only practical difference between the two.
DIN 125 or DIN 9021, which should you choose?
For most bolted metal connections, DIN 125 is perfectly adequate. It is the standard washer under the screw head and matches the thread exactly. DIN 9021 is the one to reach for when the hole is larger than the screw, or when the substrate may compress under load: the wider rim bears on more surface area and will not pull through. Both come in all seven sizes from M3 to M12, so there is no need to compromise between size and form.
Cover plates for the visible face
The cover plate to NF E27-619 is the washer you see. It covers the transition from the screw head to the surface and, paired with a colour-matched head, produces a clean, consistent finish. Available from M3 to M12 in all six colours, so the cover plate and screw head sit in exactly the same RAL shade.
Colours: Matte Black, Traffic White, Anthracite and White Aluminium
The washers are available in the same colours as our screws:
- Schwarz Glanz (RAL 9005)
- Schwarz Matt (RAL 9005)
- Verkehrsweiß (RAL 9016)
- Anthrazit (RAL 7016)
- Eisenglimmer (DB 703)
- Weißaluminium (RAL 9006)
That way washer, screw and nut all match in colour. Additional RAL colours and smaller quantities are available on request.
What goes with these?
Choose the washer in the same colour and size as your screw. For a fully colour-matched fixing, pair the washer with the appropriate screw head and a nut in the same RAL shade. With screws, only the head is coated; washers and nuts are coated all over. In any case, the stainless steel underneath will not rust.
FAQ
What are stainless steel washers also called?
A washer is also referred to as a flat washer or plain washer. All three terms describe the same part.
What is the difference between DIN 125 and DIN 9021?
DIN 125 is the standard washer. DIN 9021 has a significantly larger outer diameter for the same hole size, spreading the load over a greater area — particularly useful on softer substrates.
Which washer size do I need?
The washer size follows the thread of your screw. An M6 screw takes an M6 washer. We stock all three types for M3, M4, M5, M6, M8, M10 and M12.
Are the stainless steel washers fully coated?
Yes. Washers are powder-coated over the entire surface, unlike screws where only the head is coated. The base material is V2A stainless steel; the cover plates are in stainless steel A1.
Are the washers available in other colours?
The standard range covers Schwarz Glanz and Schwarz Matt (RAL 9005), Verkehrsweiß (RAL 9016), Anthrazit (RAL 7016), Eisenglimmer (DB 703) and Weißaluminium (RAL 9006). Additional RAL colours and smaller quantities are available on request.